APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario

desired time range, and then click Disable. To enable the Alert Action for a currently disabled 
period of time, highlight the period of time by clicking-and-dragging over the desired time range, 
and then click Enable.

c. When you have finished creating your Advanced Schedule, click OK to save the schedule and 

return to the Alert Action task.

6. Check the check boxes in the Severities check box group that correspond to the alert severities for 

which SNMP trap notifications will be sent.

7. Type in the Target Host Address field the Hostname or IP address of the SNMP based management 

system.

8. Type in the Community String field the target-specific community string that will be used when 

sending traps to the Target Host Address. 

9.  Click OK to save this Alert Action.

If you are creating an Alert Action that will use the Send Wireless SMS Message alert notification 
method:

1. Double click on the Alert Actions icon to start the Alert Actions task.

2. Click Add to open the Select Notification Method window.

3. Select Send Wireless SMS Message from the Select Notification Method pop-up window and then 

click OK to open the Add Alert Action window.

4. Type in the Alert Action Name field a name for this alert action.

5. Specify Advanced Scheduling for the Alert Action (optional). By default, all Alert Actions are 

assumed to be active 24 hours a day, 7 days a week. However, you can specify that an Alert Action 
will be active only when alert conditions occur during specific time ranges. To configure Advanced 
Scheduling:

a. Click Advanced Scheduling.... The Advanced Scheduling window opens.

b. By default, all time periods in the schedule are set to Enabled. To disable the Alert Action for a 

currently enabled period of time, highlight the period of time by clicking-and-dragging over the 
desired time range, and then click Disable. To enable the Alert Action for a currently disabled 
period of time, highlight the period of time by clicking-and-dragging over the desired time range, 
and then click Enable.

c. When you have finished creating your Advanced Schedule, click OK to save the schedule and 

return to the Alert Action task.

6. Check the check boxes in the Severities check box group that correspond to the alert severities for 

which SNMP trap notifications will be sent.

7. Type in the Destination Addresses field the addresses (such as e-mail addresses or telephone 

numbers of SMS-enabled devices) of the recipients to whom the wireless SMS message alert 

This alert action is available only if a modem that supports SMS messaging has 
been installed in or connected to the appliance. For more information, see “SMS” 
on page 133.