APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario
Los códigos de productos
NBRK0320E
Basic View: Monitoring Appliances
Using Your Appliance
21
currently selected sensor Set (if applicable) will be listed in the Sensors drop box.
5. Select from the Graph Time drop box the period of time prior to the present for which data from the
selected sensor will be graphed. By default, all data available from the past 60 minutes will be
graphed. Up to 24 hours of data can be graphed, depending on sensor configuration.
graphed. Up to 24 hours of data can be graphed, depending on sensor configuration.
Triggering Relay Outputs
If you have Output Relay Pod 120s or supported RS232-based output control devices connected to your
appliance and the currently logged in user account is authorized to trigger outputs, you can trigger
outputs using the Basic View. To trigger an output action, select from the Navigation pane the output
control device to which the relay-based device you want to trigger is connected. Then, locate the desired
relay in the list of relays located in the Sensor Readings pane. To trigger the relay, click the button that
corresponds to the relay.
appliance and the currently logged in user account is authorized to trigger outputs, you can trigger
outputs using the Basic View. To trigger an output action, select from the Navigation pane the output
control device to which the relay-based device you want to trigger is connected. Then, locate the desired
relay in the list of relays located in the Sensor Readings pane. To trigger the relay, click the button that
corresponds to the relay.