APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario

The tasks available from the Appliance Settings portion of the panel enable you to configure your 
appliance. The following tasks are available from the Appliance Settings portion of the Configuration 
panel:

• Backup: Use the Backup task to save your appliance configuration to a password-protected, 

encrypted file.

• Clock: Use the Clock task to view or change the date and time that are configured on the appliance 

internal clock, or to configure your appliance to obtain and synchronize its clock settings from an 
NTP server. 

• DNS: Use the DNS task to view or change the appliance DNS settings.

• E-Mail: Use the E-mail task to specify the e-mail servers that will be used to deliver any e-mailed 

alert notifications.

• External Storage: Use the External Storage task to configure your appliance to store data on the 

optional Extended Storage System (sold separately) or a network attached storage device (a 
Windows share or an NFS mount).

• IP Filter: Use the IP Filter task to limit access to your appliance to only specified IP addresses or IP 

address-ranges.

• License Keys: Use the License Keys task to activate or deactivate available license key-enabled 

applications that are available for use on this appliance.

• Location: Use the Location task to configure additional sensor-specific location information that 

will also be included in alert notifications generated by the appliance.

• Log: Use the Log task to specify what events will be stored and displayed in the Appliance Log, and 

to configure the appliance to post log data to a remote syslog server.

• Network Interfaces: Use the Network Interface task to view or change the network settings for 

each network interface that is available on the appliance. By default there is only 1 network 
interface (for the integrated Ethernet controller). However, if you install a wireless network adapter 
in the PC Card slot then this additional network interface is configured using this task as well.

• PPP/Modem: Use the PPP/Modem task to configure PPP communications settings. This task will 

be available only if a supported USB or PC Card modem has been connected to or installed in your