APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario
Los códigos de productos
NBRK0320E
Advanced View: Configuring Pods and Alerts
Using Your Appliance
75
To mask a portion of the image, click and drag in the image to draw a box around the region you want to
ignore. Then right-click and select Mask Selection to mask the selected region. A blue block will appear
in the region of the image to be blocked.
ignore. Then right-click and select Mask Selection to mask the selected region. A blue block will appear
in the region of the image to be blocked.
To unmask a portion of a previously masked region, click and drag in the image to draw a box around the
region you want to unmask. Then, click Unmask Selection to remove the mask from the selected region.
Any portion of the blue block out mask that you selected will then be removed.
region you want to unmask. Then, click Unmask Selection to remove the mask from the selected region.
Any portion of the blue block out mask that you selected will then be removed.
When you are finished, click OK and any changes you have made will be saved to the appliance. Click
Cancel to close the Camera Motion Configuration window without saving any changes.
Cancel to close the Camera Motion Configuration window without saving any changes.
Visual Mode Settings
Use the Visual Modes task to select the imager mode that will be used by the camera, and to select the
window of interest to be used when Pan and Scan mode is active.
window of interest to be used when Pan and Scan mode is active.
The Visual Modes window.
The Camera Pod 120’s imager is capable of capturing images at resolutions up to 1280x1024, and
supports two imaging modes: Wide Screen mode and Pan and Scan mode. In Wide Screen mode all
images that are captured are based on the entire 1280x1024 frame, while in Pan and Scan mode a portion
of the total 1280x1024 field of view is selected and used to determine what portion of the total field of
view to include in image captures. For more information about camera imager modes see the About Your
Appliance, booklet included with your appliance.
supports two imaging modes: Wide Screen mode and Pan and Scan mode. In Wide Screen mode all
images that are captured are based on the entire 1280x1024 frame, while in Pan and Scan mode a portion
of the total 1280x1024 field of view is selected and used to determine what portion of the total field of
view to include in image captures. For more information about camera imager modes see the About Your
Appliance, booklet included with your appliance.
Use the Mode drop box to specify the imager mode that will be used by the camera.
• To specify Wide Screen, select Wide Screen from the Mode drop box and then click OK.
• To specify Pan and Scan, select Pan and Scan from the Mode drop box. Then, use the arrow
buttons to move the image view displayed in this window until the contents of the image correspond
to the window of interest you wish to view and then click OK.
to the window of interest you wish to view and then click OK.