APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario
Los códigos de productos
NBRK0320E
Advanced View: Configuring Pods and Alerts
82
Using Your Appliance
To configure a threshold, select the sensor for which you will create a threshold from the Sensors
selection list. Any previously configured thresholds for the selected sensor appear in the Thresholds
selection list.
selection list. Any previously configured thresholds for the selected sensor appear in the Thresholds
selection list.
All sensors have a default, pre-configured threshold that will be generated automatically by the Advanced
View. This predefined threshold provides the most typical threshold that would be used for the specific
sensor type. However, thresholds are highly customizable and configurable, enabling you to create a wide
variety of thresholds to suit your needs. Sensor thresholds are explained in detail in “Advanced View:
Defining Thresholds” on page 141.
View. This predefined threshold provides the most typical threshold that would be used for the specific
sensor type. However, thresholds are highly customizable and configurable, enabling you to create a wide
variety of thresholds to suit your needs. Sensor thresholds are explained in detail in “Advanced View:
Defining Thresholds” on page 141.
To enable or modify a predefined sensor threshold:
1. Select a sensor from the Sensor selection list.
2. A list of currently defined thresholds for the selected sensor appears in the Thresholds selection list.
Select the threshold you wish to enable or modify from the Thresholds selection list.
3. Click Edit....
4. The Edit Threshold window appears.
– To enable the threshold, check the Enabled check box.
– To change threshold settings, use the controls in the Edit Threshold window to set new values as
desired.
Click OK to save your new threshold settings. Click Cancel to close the Edit Threshold window without
saving any changes.
saving any changes.
IPMI Devices
Use the IPMI Devices task to add network-attached, Intelligent Platform Management Interface-enabled
devices to the list of devices that are monitored by your NetBotz appliance. The Intelligent Platform
Management Interface (IPMI) standard defines a hardware and software management interface and
implementation that provide different hardware platforms with compatible server management and
control functions. The IPMI standard is promoted and supported by over 150 server manufacturers.
devices to the list of devices that are monitored by your NetBotz appliance. The Intelligent Platform
Management Interface (IPMI) standard defines a hardware and software management interface and
implementation that provide different hardware platforms with compatible server management and
control functions. The IPMI standard is promoted and supported by over 150 server manufacturers.
Note
If the selected sensor does not support configuration of thresholds a message
advising you of this appears in the Thresholds area of the interface.
advising you of this appears in the Thresholds area of the interface.
Note
The controls that are available in the Edit Threshold window are determined by
the type of threshold that you are creating or editing. For detailed instructions on
how to create or edit thresholds, see “Advanced View: Defining Thresholds” on
page 141.
the type of threshold that you are creating or editing. For detailed instructions on
how to create or edit thresholds, see “Advanced View: Defining Thresholds” on
page 141.