Geovision GV-MOUNT100 Manual De Usuario
Installing the Fixed IP Dome
83
3
3. Secure the pendant tube (GV-Mount200, No. 1) to the plate. Slide the 30 mm M8 screws
(GV-Mount300, No. 2) from the front and secure from the backside using plain washers
(GV-Mount300, No. 4), split washers (GV-Mount300, No. 5) and the M8 screw caps (GV-
Mount300, No. 6).
Backside View
4. Thread the necessary wires and cables through the pendant tube and secure the plate to
the wall with 8 self-prepared screws.
5. Thread the wires and cables into the dome and connect the network, power and other
cables to the camera. See
11.5 Connecting the Camera, GV-IPCam H.264 User’s
Manual on the software CD.
6. Secure the pendant tube to the end of the housing cap (GV-Mount902, No. 2) with M6
screws (GV-Mount902, No. 4).
7. Refer to the indicated sections of the
GV-IPCam H.264 User’s Manual on the software
CD to:
A. Access the live view. See
14.1 Accessing the Live View.
B. Adjust the angle, focus and zoom. See steps 6 and 7 in
11.4.1 Hard-Ceiling Mount.
8. Put on the housing cover. See
3.1.2 Putting on the Housing Cover.