Brodit ProClip 654755 654755 Prospecto

1.

2.

4.

3.

Please read all of the instructions and look at the pictures before attaching the ProClip.  
 
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the center console
and the dashboard, to widen the gap. Use the enclosed alcohol pad to clean the area where the ProClip is to be
installed. Peel off the adhesive tape cover on the ProClip. Press the curved edge on the left part of the ProClip
into the gap above the gap opener. Flip the ProClip toward the center console so the curved left edge hooks
behind the dashboard. Pull out the gap opener.  
 
2. Press the gap opener into the gap between the frame surrounding the center console and the control panel.
Pull the right part of the ProClip toward you and hook it over the frame surrounding the center console. Press the
lower corner of the angled right edge into the gap above the gap opener.  
 
3. Move the gap opener so it is placed above the ProClip. Press forward on the upper corner of the right part so
all of the angled edge goes all the way into the gap. Pull out the gap opener.  
 
4. The ProClip is in place.