Gefen GEF-HDFST-444-4ELR Prospecto
4x4 Matrix for HDMI with four ELR-POL Outputs and
Bi-Directional IR
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefenpro.com
Route any four HDMI sources and Bi-Directional IR control to four
different locations up to 330 feet (100 meters) away, using
HDBaseT® over a single CAT-5e cable
The GefenPRO 4x4 Matrix for HDMI w/4 ELR-POL Outputs and Bi-Directional
IR routes up to four Hi-Def sources at resolutions up to 1080p Full HD with
Deep Color and multi-channel digital audio to any of four HDTV displays, using
FST to speed up the HDCP authentication process. Each of the included
ELR-POL Receivers units are used to extend HDMI to four locations, using
Gefen ELR (Extra Long Range) and POL (Power Over Line) technologies. ELR is
based on HDBaseT® and allows the extension of HDMI using a single CAT-5e
cable. POL eliminates the need to externally power the Receiver units. The
GefenPRO 4x4 Matrix for HDMI supports 3DTV pass-through and eight channel
digital audio formats such as Dolby® TrueHD and DTS-HD® Master Audio™.
3D content can be displayed when connecting a 3DTV and 3D source. Each
source is accessible at all times from any display location. Bi-Directional IR
allows each connected source to be controlled from any of the viewing
locations, as well as each Hi-Def display being controlled from the source
location. The IR All Out port on the matrix broadcasts IR commands from any of
the viewing locations to all sources. The IR All In port on the matrix broadcasts
IR commands from an automation control device by the matrix to all remote
displays. The matrix can be controlled by using the included IR Remote, RS-232,
IP control (Telnet or Web server interface), or by using the front-panel push
buttons.
IR routes up to four Hi-Def sources at resolutions up to 1080p Full HD with
Deep Color and multi-channel digital audio to any of four HDTV displays, using
FST to speed up the HDCP authentication process. Each of the included
ELR-POL Receivers units are used to extend HDMI to four locations, using
Gefen ELR (Extra Long Range) and POL (Power Over Line) technologies. ELR is
based on HDBaseT® and allows the extension of HDMI using a single CAT-5e
cable. POL eliminates the need to externally power the Receiver units. The
GefenPRO 4x4 Matrix for HDMI supports 3DTV pass-through and eight channel
digital audio formats such as Dolby® TrueHD and DTS-HD® Master Audio™.
3D content can be displayed when connecting a 3DTV and 3D source. Each
source is accessible at all times from any display location. Bi-Directional IR
allows each connected source to be controlled from any of the viewing
locations, as well as each Hi-Def display being controlled from the source
location. The IR All Out port on the matrix broadcasts IR commands from any of
the viewing locations to all sources. The IR All In port on the matrix broadcasts
IR commands from an automation control device by the matrix to all remote
displays. The matrix can be controlled by using the included IR Remote, RS-232,
IP control (Telnet or Web server interface), or by using the front-panel push
buttons.
How It Works
Using HDMI cables, connect up to four Hi-Def sources to the four HDMI inputs
on the matrix. Connect up to four HDTV displays to the included Receiver units,
also using HDMI cables. Use a single CAT-5e cable, up to 330 feet
(100 meters), to connect each of the Receiver units to the matrix.
on the matrix. Connect up to four HDTV displays to the included Receiver units,
also using HDMI cables. Use a single CAT-5e cable, up to 330 feet
(100 meters), to connect each of the Receiver units to the matrix.
Connect the included AC power cord to the matrix and connect it to an
available electrical outlet. Power to each of the Receiver units is delivered from
the matrix. To control each Hi-Def source from the display location, connect an
IR Extender (Gefen part no. EXT-RMT-EXTIRC or EXT-RMT-EXTIRN) to the IR Ext
jack on each Receiver unit. Connect an IR Emitter (Gefen part no. EXT-IREMIT)
to the corresponding IR Out for each source input on the matrix and place the
IR emitter over the IR sensor of the Hi-Def source. Point the IR remote of that
source towards the IR Extender at the display location to control the source. To
control the display placed near the Receiver unit, connect the IR Emitter output
from an automation device (such as the Gefen PACS or MINI-PACS) to the
corresponding IR Input on the matrix. Connect an IR emitter (Gefen part no.
EXT-IREMIT) to the IR Out on each Receiver unit, and attach the IR emitter over
the IR sensor of the display.
available electrical outlet. Power to each of the Receiver units is delivered from
the matrix. To control each Hi-Def source from the display location, connect an
IR Extender (Gefen part no. EXT-RMT-EXTIRC or EXT-RMT-EXTIRN) to the IR Ext
jack on each Receiver unit. Connect an IR Emitter (Gefen part no. EXT-IREMIT)
to the corresponding IR Out for each source input on the matrix and place the
IR emitter over the IR sensor of the Hi-Def source. Point the IR remote of that
source towards the IR Extender at the display location to control the source. To
control the display placed near the Receiver unit, connect the IR Emitter output
from an automation device (such as the Gefen PACS or MINI-PACS) to the
corresponding IR Input on the matrix. Connect an IR emitter (Gefen part no.
EXT-IREMIT) to the IR Out on each Receiver unit, and attach the IR emitter over
the IR sensor of the display.
Gefen FST
Fast Switching Technology (FST) is a Gefen software implementation
for HDMI products. FST was created to improve the lengthy HDMI
authentication process, based on the HDMI and HDCP specifications.
FST allows for connecting/disconnecting or turning any of the HDTV
displays on or off without affecting other displays within the
audio/video distribution system.
for HDMI products. FST was created to improve the lengthy HDMI
authentication process, based on the HDMI and HDCP specifications.
FST allows for connecting/disconnecting or turning any of the HDTV
displays on or off without affecting other displays within the
audio/video distribution system.
Features*
• Routes any four Hi-Def sources to any four HD displays independently
• Sends and Receives IR signals from any of the 4 remote locations to the matrix
• Includes four ELR-POL receiver units
• Supported HDMI features:
• Sends and Receives IR signals from any of the 4 remote locations to the matrix
• Includes four ELR-POL receiver units
• Supported HDMI features:
• Resolutions up to 1080p Full HD
•
HDCP compliant
•
12-bit Deep Color
•
x.v. Color
•
LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus,and
DTS-HD® Master Audio™
•
3DTV pass-through
•
Lip Sync pass-through
• ELR and HDBaseT® technologies allow extension up to 330 feet (100 meters)
• POL feature provides power to each ELR receiver
• Gefen FST speeds up the HDCP authentication process
• Fast and Slow FST Modes
• Advanced EDID Management for rapid integration of sources and displays
• Ability to save and recall presets
• Supports DVI sources and displays
• Field-upgradeable firmware via IP or RS-232
• Front Panel Switching
• IR Control of the matrix via front panel sensor and from each
Receiver location (using EXT-RMT-EXTIRC or EXT-RMT-EXTIRN)
• Broadcast of IR commands from the matrix side to all viewing locations, and from
each receiver location to all sources
• Serial (RS-232) control
• IP Control via web server interface and telnet
• Rack mountable (2U tall, rack ears included)
• Internal power supply with detachable IEC AC cord
• Back panel master power switch
• POL feature provides power to each ELR receiver
• Gefen FST speeds up the HDCP authentication process
• Fast and Slow FST Modes
• Advanced EDID Management for rapid integration of sources and displays
• Ability to save and recall presets
• Supports DVI sources and displays
• Field-upgradeable firmware via IP or RS-232
• Front Panel Switching
• IR Control of the matrix via front panel sensor and from each
Receiver location (using EXT-RMT-EXTIRC or EXT-RMT-EXTIRN)
• Broadcast of IR commands from the matrix side to all viewing locations, and from
each receiver location to all sources
• Serial (RS-232) control
• IP Control via web server interface and telnet
• Rack mountable (2U tall, rack ears included)
• Internal power supply with detachable IEC AC cord
• Back panel master power switch
Specifications*
• Maximum Pixel Clock: 225 MHz
• ELR extension range: Up to 330 feet (100 meters)
• Matrix Video Input Connectors: (4) HDMI Type A 19-pin, female, locking
• Matrix Video Output Connectors: (4) ELR-POL RJ45, female
• Receiver ELR-POL Input Connector: (1) RJ45, female
• Receiver Video Output Connector: (1) HDMI Type A 19-pin, female, locking
• Power Indicator (Matrix/Receiver): LED, blue=On, red=Standby
• Lock Indicator (Matrix): LED, blue
• USB Port (Matrix): Mini-B, female (factory use only)
• Ethernet Port (Matrix): (1) RJ45, female, shielded
• RS-232 Port (Matrix): (1) DB-9, female
• IR Input Port (Matrix): (5) 3.5mm mini-mono jacks
• IR Output Port (Matrix): (5) 3.5mm mini-mono jacks
• IR Extender Port (Receiver): (1) 3.5mm mini-stereo jack
• IR Output Port (Receiver): (1) 3.5mm mini-mono jack
• Power Supply: Internal, 100V to 240V AC, 50/60 Hz, detachable IEC cord
• Power Consumption (Matrix): 200W (max.)
• Operating Temperature: 0 to + 104 °F (0 to + 40 °C)
• Rack mounting requirements (Matrix): Standard 19” rack, 2U high
• Dimensions (Matrix - W x H x D): 17.25" x 3.5" x 12"
(440mm x 89mm x 305mm)
• Dimensions (Receivers - W x H x D): 4.4” x 1.1” x 3.35”
(110mm x 27mm x 85mm)
• Shipping Weight (1 Matrix and 4 Receivers): 37 lbs. (16.8 kg)
• ELR extension range: Up to 330 feet (100 meters)
• Matrix Video Input Connectors: (4) HDMI Type A 19-pin, female, locking
• Matrix Video Output Connectors: (4) ELR-POL RJ45, female
• Receiver ELR-POL Input Connector: (1) RJ45, female
• Receiver Video Output Connector: (1) HDMI Type A 19-pin, female, locking
• Power Indicator (Matrix/Receiver): LED, blue=On, red=Standby
• Lock Indicator (Matrix): LED, blue
• USB Port (Matrix): Mini-B, female (factory use only)
• Ethernet Port (Matrix): (1) RJ45, female, shielded
• RS-232 Port (Matrix): (1) DB-9, female
• IR Input Port (Matrix): (5) 3.5mm mini-mono jacks
• IR Output Port (Matrix): (5) 3.5mm mini-mono jacks
• IR Extender Port (Receiver): (1) 3.5mm mini-stereo jack
• IR Output Port (Receiver): (1) 3.5mm mini-mono jack
• Power Supply: Internal, 100V to 240V AC, 50/60 Hz, detachable IEC cord
• Power Consumption (Matrix): 200W (max.)
• Operating Temperature: 0 to + 104 °F (0 to + 40 °C)
• Rack mounting requirements (Matrix): Standard 19” rack, 2U high
• Dimensions (Matrix - W x H x D): 17.25" x 3.5" x 12"
(440mm x 89mm x 305mm)
• Dimensions (Receivers - W x H x D): 4.4” x 1.1” x 3.35”
(110mm x 27mm x 85mm)
• Shipping Weight (1 Matrix and 4 Receivers): 37 lbs. (16.8 kg)
*Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners.
GEF-HDFST-444-4ELR
REV. A1
®
F
AST
S
WITCHING
T
ECHNOLOGY
®