Buffalo 2 Port USB 3.0 Express Interface Card IFC-EC2U3UC Hoja De Datos

1

IFC-EC2U3/UC User’s Manual

•  USB devices (such as keyboards or mice) connected to this card will be available to use after

Windows boots normally. However, USB devices connected to this device cannot be used

for BIOS settings, MS-DOS mode, or Safe mode in Windows. For best results, connect USB

keyboards and mice to a USB port on the PC's motherboard and reserve the ports on this card

for high-speed devices.

•  This card supports ACPI power management, but does not support remote wake up.
•  Energy saving modes such as stand by, hibernation, and sleep may not be available for some

computers with this card installed.

• If you use bus-powered USB devices, such as the Buffalo MiniStation, connect the auxilary

power cable (included in your package) before connecting any USB devices to this product.

• Do not connect any other auxilary power cable besides the one provided with this product.

Unplug all USB devices before connecting it.

• This device may be connected or removed while your computer is on. Dismount it normally

from within your OS before removing.

• To use more than 2 USB devices, connect a USB hub. Up to 4 USB hubs may be connected.
• Dismount and remove any attached USB devices before unplugging this device from your

computer.

• If a connected USB device is not detected by your computer, unplug and then reconnect it.

This section lists some common problems with solutions for each.

Conflicts with another expansion card

A new expansion card may cause I/O port address

duplication. Check all settings for all cards. Remove

cards one at a time if necessary to confirm which cards

are causing the problem.

The computer is broken

If the computer still does not boot up after removing

the IFC-EC2U3/UC, the computer itself may be

broken. Please contact the vendor you purchased your

computer from.

Device not detected

Turn off your computer and reinstall the card. If there is

an  empty  Express  card  slot  available,  try  to  install  the

card in a different Express card slot.