Arexx BS-1000 LAN Receiver BS-1000 Guía De Información

The BS-1000 LAN receiver makes it possible to show the sensor 

data of the AREXX MultiLog system on all Windows computers in 

your network. In this case it is possible to let the BS-1000 work stand 

alone, so the measurement data will be sent real time via the net-

work to the appointed PC’s. 

You can also process the sensor data with the MultiLog software and 

use the LAN receiver in the same way as the BS-500 receiver. It is 

also possible to use the BS-1000 as a USB receiver or as a 

standalone receiver with memory reception also. The BS-1000 has 

a built-in Messenger application, which makes it possible to send 

alarm e-mails without intervention of a PC. With the Messenger 

application it is also possible to send measurement data directly to 

a webserver. 

Extensive Messenger and Synchronization software 

The RPT-7700 repeater is a receiver and transmitter at the same 

time, which allows you to cover larger distances with the sensors 

of the AREXX MultiLog system. The repeater will receive the 

available sensor signals and retransmit these to the MultiLog 

receiver.

If one or more sensors has been designed to cover a distance 

of 50 meters (from sensor to receiver), however due to certain 

circumstances merely covers 40 meters, you may place this 

repeater between sensor and receiver. The RPT-7700 will 

receive the sensor data-signal and retransmit these again to a 

multiLog receiver.

The RPT-7700 allows you to cover larger distances. To address 

a remote MultiLog system you may place several repeaters in 

series.

Power Adapter