Greisinger EB 3000 Display, control and monitoring device EB 3000 - 603291 Hoja De Datos

E35.0.01.6C-03                     Manual for connection and operation of the EB 3000                        page 11 of 19

When detecting an operating state which is not permissible, or the current 

-measurement channel

has an undefined operating state, the EB3000 will display an appropriate error code.

The following error codes are defined. An errror code will displayed, if an 

-measurement channel

with an occurred error is selected.

Indicates that the valid measuring range of the 

-measurement channel has been exceeded.

Indicates that the values are below the valid measuring range of the 

-measurement channel.

Indicates that the valid display range (9999 digit) of the device has been exceeded.

Possible causes:

- Incorrect scale.
- Counter overflow.

Remedies:

- The error-message will be reset if the display value is below 9999.
- Reset the counter.

Indicates that display value is below the valid display range of the device (-1999 digit).

Possible causes:

- Incorrect scale.
- Counter underflow.

Remedies:

- The error-message will be reset if the display value is above -1999.
- Reset the counter

When happening frequently, check the scale-setting, maybe it was set too low and should be increased
(e.g. factor 10)

The device features an integrated self-diagnostic-function which checks essential parts of the de-
vice permanently. When detecting a failure, error-message Err.7 will be displayed.

The device features an integrated diagnostic-function for the connected sensor resp. transmitter.
When detecting a failure, error-message Err.9 will be displayed.