Gw Instek GPT-9801 Insulation measuring device, GPT-9801 Manual De Usuario
Los códigos de productos
GPT-9801
OPERATION
79
Automatic Tests
This section describes how to create, edit and run automatic tests.
Automatic tests allow you to link together up to 16 different
MANU tests and run them sequentially. Each stored MANU test is
used as a test step when creating an AUTO test.
Automatic tests allow you to link together up to 16 different
MANU tests and run them sequentially. Each stored MANU test is
used as a test step when creating an AUTO test.
Edit Automatic Test Settings → from page 81
Adding a Step to the Automatic Test → from page 82
Creating an AUTO Test File Name → from page 83
Saving and Exiting EDIT Status → from page 84
Automatic Test Page View → from page 85
Running an Automatic Test → from page 88
Automatic Test Results → from page 92
Before operating the GPT-9000 please read the safety precautions as
outlined in the Set Up chapter on page 20.
Choose/Recall an Automatic Test
Background
The tester must first be put into AUTO mode to
create or run automatic tests.
create or run automatic tests.
Up to 100 automatic tests can saved/recalled.
Steps
1. If the tester is in MANU mode,
press and hold the MANU/AUTO
key for three seconds. This will put
the tester into Auto mode.
key for three seconds. This will put
the tester into Auto mode.
The tester can only switch between
AUTO and MANU mode when in
the VIEW status.
AUTO and MANU mode when in
the VIEW status.
MANU/AUTO