Gossen Metrawatt Metrahit Iso Insulation measuring device, CAT III 600 V Metrahit Iso Manual De Usuario
Los códigos de productos
Metrahit Iso
48
GMC-I Gossen-Metrawatt GmbH
Device and Measuring Parameters
6
Device and Measuring Parameters
The instrument’s “
SETUP” mode (menu mode) makes it possible to
set operating and measuring parameters, query information and
activate the interface.
➭ The menu mode is accessed by pressing the
activate the interface.
➭ The menu mode is accessed by pressing the
MEASURE | SETUP key, assuming that the instrument is switched
on and set to “Measure” (measuring mode operation).
“
on and set to “Measure” (measuring mode operation).
“
1nFo” appears at the display.
➭ The main menus, i.e. the “SET” and “tEMP” menus, as well as
the “
SEnd” and “StorE” menus, are accessed, and the display is
returned to “
InFo”, by repeatedly activating the
Y
ZUV
keys
(in any direction).
➭ After selecting the desired main menu, sub-menus are
accessed by pressing the FUNC | ENTER key.
➭ The desired parameter is selected by repeatedly pressing the
UV
keys.
➭ In order to check or change a parameter, acknowledge it with
the FUNC | ENTER key.
➭ The
Y
Z
keys can be used to position the cursor at the entry
position.
The desired value is selected with the help of the
The desired value is selected with the help of the
UV
keys.
➭ Changes can only be accepted with the FUNC | ENTER key.
➭ You can return to the sub-menu without making any changes
➭ You can return to the sub-menu without making any changes
by pressing the ZERO | ESC key, and to the main menu by press-
ing the ZERO | ESC key once again etc.
ing the ZERO | ESC key once again etc.
➭ You can switch to the measuring mode from any menu level by
pressing the FUNC | ENTER key.
After repeatedly pressing the MEASURE | SETUP key (without first
turning the multimeter off), you can return to the last selected
menu or parameter from the measuring mode.
turning the multimeter off), you can return to the last selected
menu or parameter from the measuring mode.
Example: Setting Time
1nFo
Z
...
Z
set
rAte
V
...
V
t iME
10:24 (hh:mm)
Y
ZUV
Setting hours and minutes:
Y
Z
Advance to desired entry position.
UV
Change the setting, the entry position blinks.
Press and hold the key to change the setting rapidly.
The new time setting is activated after
acknowledgement.
Press and hold the key to change the setting rapidly.
The new time setting is activated after
acknowledgement.
MEASURE
SETUP
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER