Gossen Metrawatt Metrahit Iso Insulation measuring device, CAT III 600 V Metrahit Iso Manual De Usuario
Los códigos de productos
Metrahit Iso
66
GMC-I Gossen-Metrawatt GmbH
Accessories
10
Accessories
10.1 General
The extensive accessories available for our measuring
instruments are checked for compliance with currently valid safety
regulations at regular intervals, and are expanded as required for
new applications. Currently up-to-date accessories which are
suitable for your measuring instrument are listed at the following
web address along with photo, order number, description and,
depending upon the scope of the respective accessory, data
sheet and operating instructions: www.gossenmetrawatt.de
(
The extensive accessories available for our measuring
instruments are checked for compliance with currently valid safety
regulations at regular intervals, and are expanded as required for
new applications. Currently up-to-date accessories which are
suitable for your measuring instrument are listed at the following
web address along with photo, order number, description and,
depending upon the scope of the respective accessory, data
sheet and operating instructions: www.gossenmetrawatt.de
(
→ Products → Measuring Technology – Portable →
Digital Multimeters
→ METRAHIT⏐ ... → Accessories).
10.2 Technical Data for Measurement Cables
(scope of delivery: KS17-2 safety cable set)
Electrical Safety
Maximum rated voltage
Measuring category
Measuring category
1000 V CAT III, 600 V CAT IV
Maximum rated
current
current
16 A
Ambient Conditions (EN 61010-031)
Temperature
–20
°C ... + 50 °C
Relative humidity
50 to 80%
Fouling factor
2
10.3 Power Pack NA
⏐
X-
TRA
(not included)
Use only power packs from GMC-I Gossen-Metrawatt GmbH
only in combination with your instrument. This assures operator
safety by means of an extremely well insulated cable, and safe
electrical isolation (nominal secondary ratings: 5 V / 600 mA).
Installed batteries are disconnected electronically if the power
pack is used, and need not be removed from the instrument.
only in combination with your instrument. This assures operator
safety by means of an extremely well insulated cable, and safe
electrical isolation (nominal secondary ratings: 5 V / 600 mA).
Installed batteries are disconnected electronically if the power
pack is used, and need not be removed from the instrument.