Slv 133700 E27 Metal (brushed) 133700 Manual De Usuario
Los códigos de productos
133700
ENGLISH
OPERATING MANUAL FOR
WALL- AND CEILING FITTING
133700
Read this short manual carefully and keep it accessible for further
reference!
reference!
SAFETY MESSAGES
Disregard of the safety messages may lead to danger of life, burning or
fire!
fire!
•
Installation, mounting or works on the electrical connection may only be
carried out by an approved electrician.
•
The product may not be modified or converted.
•
Do not hang or fasten anything on the product, especially no decoration.
•
Do not cover the product - provide free air circulation.
•
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
A malfunction exists when:
switch or by the fuse.
A malfunction exists when:
•
visible damages appear.
•
the product does not work properly (e.g. flickering).
•
smoke, steam or crackling sounds appear.
•
smell of burning is recognisable.
•
an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
approved electrician!
•
This product is not intended to be used by children. Ensure that children do
not suffer any harm e.g. by burns from hot surfaces or by electrical shock.
Additional safety messages are indicated by this symbol:
.
USE AS DIRECTED
This product serves exclusively lighting purposes and may:
•
only be used with a voltage of 230V ~50Hz.
•
only be installed according to safety class I (one).
•
only be operated when firmly mounted on a stable, even and tilt-fixed
surface.
•
only be operated on normally or not flammable surfaces.
•
only be used in dry condition,
•
not in damp or dirt-endangered rooms.
•
not in areas of high air humidity.
•
not be exposed to strong mechanical loads or to strong contamination.
MAINTANANCE AND CARE
Light source
Exchange the light source always before it reaches its lifespan, to avoid
personal injuries, or damages of the luminaire or other objects.
Disconnect the product from the power supply, before you exchange the
light source. Let the light source cool down before replacement.
Use only light sources that are suitable for the product. Suitable light
sources are indicated on the type label.
•
Suitable light sources: TC-TSE, E27, 20W max.
•
Replacing the light source
•
Use a lamp suitable for operation with motion detectors only.
•
Touch energy-saving-lamps on the plastic housing, not on the bulb
glass.
•
Remove the glass.
•
Remove the used light source.
•
Screw the new light source into the socket.
•
Put the glass back on.
Care
Disconnect the product from the power supply and let it cool down, before
you clean the product.
•
Clean the product on a regular basis using a slightly moistened, soft and fluff-
free cloth. Please also note additional supplied notes on maintanance and
care.
care.
STORAGE AND DISPOSAL
Storage
•
The product must be stored in a dry and clean environment. Do not strain
the product mechanically during storage.
After a damp or soiling storage the product may only be installed after
checking its condition by an approved electrician.
Disposal (European Union)
•
Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive(WEEE,
2003/108) on electrical and electronic devices at local collection points for
such devices!
2003/108) on electrical and electronic devices at local collection points for
such devices!
INSTALLATION
(only by an approved electrician)
Switch off the mains or respectively the connection lead before doing any
works!
Use only parts, which are supplied with the product or are described as
accessories!
Inspect the product for loose parts inside the housing. When there are loose
parts inside the housing and these are not explicitly described the product may
not be installed or operated.
not be installed or operated.
Use the supplied fastening material only when it is suited for the installation
background. If this is not the case use only fastening material suiting the
installation background.
installation background.
Unpacking
•
Carefully take the product out of the packaging removing any transport
safeguards.
•
Before disposal of the packaging material make sure that all components
of the product are removed.
Installation place
•
The product is solely suited for installation on the wall and ceiling.
Installation steps (read completely before installation)
•
Install the luminaire as shown in the figure.
•
Electrical Connection
•
The product must be able to be separated by an all pole separation
from the current supply.
•
For electric connection attach the black or brown wire (live conductor)
of the connection lead with the clamp L and the blue wire (neutral
conductor) of the connection lead with the clamp N. The green-yellow
wire (protective conductor) of the connection lead has to be tightly
conductor) of the connection lead with the clamp N. The green-yellow
wire (protective conductor) of the connection lead has to be tightly
screwed into the earth clamp
of the product.
•
Inserting the light source
•
Screw the light source into the socket.
Detector Adjustment:
Detection Range
0,5/1 – 5/10 m
Time Setting
8 sek. – 20 min.
Light Control
10 – 2000 lux
SENS
+
TIME
+
LUX
•
Set the light control to its peak position (sun symbol).
•
Adjust to the desired detection range.
•
Adjust the time setting to the desired period of time.
The motion detection is interrupted for approx..1 sec. after each shutdown
of the luminaire.
of the luminaire.
•
Adjust the light control to the desired brightness at which the light should
switch on.
Check if the product functions properly and is securely fixed!
art.-no. 133700 © 29.05.2013 SLV Elektronik GmbH, Daimlerstr. 21-23, 52531
Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0
Technical Details are subject to change.
Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0
Technical Details are subject to change.