Gw Instek LCR-816 Digital-Multimeter, DMM, LCR-816 Hoja De Datos

Running Measurement 

Select Single measurement 

 

Background 

Measurements can be manually controlled 
(MANU) or automatically updated (AUTO). 
In manual mode, one measurement is performed 
by pressing the start key. 

Panel operation 

1.  Press the START key to manually 

perform a measurement when in 
manual mode. 

 

 

 

 

 

 

TESTING will appear on the screen, followed by 
the measurement results. The duration of the test 
will depend on the measurement accuracy and the 
number of averages used. 

Select Automatic measurement 

 

Background 

Measurement can be manually controlled (MANU) 
or automatically updated (AUTO). 
In continuous mode (AUTO), measurements are 
automatically done and the display is updated 
according to the measurement speed setting. 

Panel operation 

1.  Hold the START key for a few 

seconds to toggle between automatic 
(AUTO) and manual (MANU) 
mode.  

2.  When in AUTO mode, 

measurements will start 
automatically until AUTO mode is 
switched back to MANU. 

 

 

 

 

 

 

The bottom of the screen will indicate if AUTO or 
MANU mode is activated. 

Testing will appear on the screen each time a 
measurement is completed.