Bender VMD4105-D-2 B93010045 Hoja De Datos

19

 

Unpack all the parts supplied with the system. Avoid sharp-edged tools 
that may damage the content of the packaging.

 

Compare your order with our delivery note to check that you have 
received all products in full. The article numbers and type designation 
printed on the nameplates provide an easy means of uniquely identify-
ing each device.

 

Check all parts supplied for any evidence of damage in transit.

 

Equipment damaged in transit must not be used. If a device has sus-
tained damage, please contact Bender. Details of who to contact are 
indicated on the delivery documents.

 

When storing the devices in an environment where the temperature is 
wintry and cold:
Leave the devices to stand for 3 to 4 hours at room temperature before 
connecting the power supply. When the devices are moved from a cold 
to a warm environment, condensation will be evident on all parts. 
Putting damp devices into operation risks damaging electrical compo-
nents and there is a danger of electric shock on contact.

Equip the supply voltage of all system components with fuses. IEC 60364-4-43 
requires protective devices to be used to protect the component in the event 
of a short circuit. We recommend the use of 6 A fuses.