Reely remote control RtF 2100 mm 1289571 Hoja De Datos

The linkages of the ailerons are pre-installed ex works (1). Also check if the rudder horns of the linkage rods are in the 

middle position of the rudder horns (2). 
In the neutral position of aileron trimming and control lever, the ailerons need to be in the neutral position as well and 

end flush (3) with the rear wing edge. If this is not the case, the ailerons must be adjusted by twisting the clevises in

or out.
The connection of the aileron servos is described in the following chapter „Mounting the Wing“. The correct function is 

explained in chapter „Checking the Control Functions“.

 The wings offer the option of installing additional wing flaps. The wings have already been prepared for

this.  

 

The material needed for this (servos, cables, linkage parts, etc.) are not included. Since this conversion re-

quires craftsmanship, model-building skills and a computer remote control, the conversion is not described 

in any more detail in these operating instructions. The wing flaps must be activated according to your own

discretion. 

The wing flaps are not needed for operation as a beginner‘s model.