Reely remote control RtF 2100 mm 1289571 Hoja De Datos

There are two ways of replacing a damaged propeller.

Each propeller blade is anchored at the propeller hub with a bolt. The bolt is secured by a burst ring (1). Removing the 

burst ring permits removing the bolt and replacing the damaged propeller blade. The bolt must be secured with the 

burst ring again after the replacement.

Remove the spinner cap by turning out the spinner‘s (2) attachment screw.
Loosen the central nut below the spinner cap and pull the old propeller including the spinner off the motor shaft. 
Attach the new propeller to the motor shaft so that there is a distance of 2 - 3 mm between the rear spinner plate and 

the fuselage. Tighten the central nut again and then attach the spinner cap.