Blade 200 SR X RTF BLH2000 Hoja De Datos

Drift in calm winds

Vibration, damaged linkage, dam-
aged servo

Under normal operation the transmitter trims should not 
require adjustment and the center positions are memorized 
during initialization. If you fi nd that trim adjustments are nec-
essary after take off, verify the balance of all rotating compo-
nents, ensure the linkages are not damaged and make sure 
the servos are in proper working condition.

Drift in wind

Normal

The model will drift with the wind but should remain level in 
fl ight. Simply hold the cyclic stick in the necessary position 
to keep the model stationary.  The model must lean into the 
wind to remain stationary, if the model remains level then it 
will drift with the wind.

Panic Recovery or Return to 
Level does not level the model

Model was not initialized on a level 
still surface

Re-initialize the model on a level and still surface.

Model was not taken off of a level 
surface

Always lift off from a level surface.

Severe vibration

Rotating component out of balance

Check the main shaft, tail rotor, main rotor blades, main 
frame and adapter for damage, replace as necessary. Vibra-
tion must be minimized for Panic Recovery and Return to 
Level functions to work properly.