Advantech EKI-1522 2-port RS-232/422/485 Serial Device Server EKI-1522-AE Hoja De Datos
Los códigos de productos
EKI-1522-AE
9
EKI-1521/1522/1524 User Manual
Chapter 2
G
etting
Started
2.1.3
TCP Server Mode
In TCP server mode, you might initiate the TCP connection from host to EKI serial
device server. This operation mode support max. five simultaneous connections for
each serial port on EKI serial device server from one host or several hosts, however
multi-hosts collect the data from one serial port at the same time
device server. This operation mode support max. five simultaneous connections for
each serial port on EKI serial device server from one host or several hosts, however
multi-hosts collect the data from one serial port at the same time
Figure 2.4 TCP Server Mode
2.1.4
TCP Client Mode
In TCP Client mode, the TCP connection will be established from EKI serial device
server. This operation mode supports max.16 simultaneous connections for each
serial port on EKI-1521/1522/1524 to one host or several hosts. You should configure
the IP address and TCP port number of the network hosts which the EKI serial device
server connect to using Advantech Serial Device Server Configuration Utility. After
configuration, when EKI serial device server receives the data from serial port, the
device server will employ the connection to hosts which are configured.
server. This operation mode supports max.16 simultaneous connections for each
serial port on EKI-1521/1522/1524 to one host or several hosts. You should configure
the IP address and TCP port number of the network hosts which the EKI serial device
server connect to using Advantech Serial Device Server Configuration Utility. After
configuration, when EKI serial device server receives the data from serial port, the
device server will employ the connection to hosts which are configured.
Figure 2.5 TCP Client Mode