TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

90

 

MAC address configuration can improve the network security by configuring the Port Security and 

maintaining the address information by managing the address Table. 

The mac address-table static command is used to add the static MAC address 

entry. To remove the corresponding entry, please use no  mac address-table 

static  command. The static address can be added or removed manually, 

independent of the aging time. In the stable networks, the static MAC address 

entries can facilitate the switch to reduce broadcast packets and enhance the 

efficiency of packets forwarding remarkably. 

mac address-table static mac-addr  vid  vid  interface  { fastEthernet  port | 

gigabitEthernet port } 

no mac address-table static {  mac-addr | vid vid | mac mac-addr  vid vid  | 

interface { fastEthernet port | gigabitEthernet port } } 

mac-addr  ——  The MAC address of the entry you desire to add. 

vid  ——  The VLAN ID number of your desired entry. It ranges from 1 to 4094. 

——

  The Fast/Gigabit Ethernet port number. 

Global Configuration Mode 

Add a static Mac address entry to bind the MAC address 00:02:58:4f:6c:23, 

VLAN1 and Fast Ethernet port 1 together: 

TL-SL3428(config)#mac address-table static 00:02:58:4f:6c:23  vid 1 

interface fastEthernet 1/0/1 

Delete the static address entry whose VLAN id is 1: 

TL-SL3428(config)#no mac address-table static vid 1