Manualsbrain.com
  1. Manuales
  2. Marcas
  3. TP-LINK
  4. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch
  5. Hoja De Datos

TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

Los códigos de productos
TL-SL3428
Descargar
Página de 232
TL-SL3428/TL-SL3452
JetStream L2 Managed Switch CLI Guide
 
1
 
Preface 
This Guide is intended for network administrator to provide referenced information about CLI 
(Command Line Interface). The device mentioned in this Guide stands for TL-SL3428/TL-SL3452 
JetStream L2 Managed Switch. 
The two devices of TL-SL3428 and TL-SL3452 are sharing this User Guide. For simplicity, we will 
take TL-SL3428 for example throughout the configuration chapters. TL-SL3428 and TL-SL3452 
just differ in the number of LED indicators and ports and all figures in this guide are of TL-SL3428. 
Overview of this Guide 
Chapter 1: Using the CLI 
Provide information about how to use the CLI, CLI Command Modes, Security Levels and some 
Conventions. 
Chapter 2: User Interface 
Provide information about the commands used to switch between five CLI Command Modes.   
Chapter 3: IEEE 802.1Q VLAN Commands 
Provide information about the commands used for configuring IEEE 802.1Q VLAN. 
Chapter 4: Protocol-based VLAN Commands 
Provide information about the commands used for configuring Protocol-based VLAN. 
Chapter 5: Voice VLAN Commands 
Provide information about the commands used for configuring Voice VLAN. 
Chapter 6: GVRP Commands 
Provide information about the commands used for configuring GVRP (GARP VLAN registration 
protocol). 
Chapter 7: EtherChannel Commands 
Provide information about the commands used for configuring LAG (Link Aggregation Group) and 
LACP (Link Aggregation Control Protocol).   
Chapter 8: User Manage Commands 
Provide information about the commands used for user management. 
Chapter 9: Binding Table Commands 
Provide information about the commands used for binding the IP address, MAC address, VLAN 
and the connected Port number of the Host together. Besides it also provide information about the 
commands used for monitoring the process of the Host obtaining the IP address from DHCP