Manualsbrain.com
  1. Manuales
  2. Marcas
  3. TP-LINK
  4. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch
  5. Hoja De Datos

TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

Los códigos de productos
TL-SL3428
Descargar
Página de 232
TL-SL3428/TL-SL3452
JetStream L2 Managed Switch CLI Guide
 
118
 
media-type 
Description 
The media-type command is used to configure the media type of Combo port. 
For a Combo port, the media type should be configured before you set its speed 
and mode. This command does not apply to TL-SL3452 since TL-SL3452 has 
no Combo port. 
Syntax 
media-type { rj45 | sfp } 
Parameter 
rj45 | sfp    —— Media type. 
Command Mode 
Interface Configuration Mode (interface gigabitEthernet / interface range 
gigabitEthernet) 
Example 
Configure the media type of Combo port 28T as “SFP”: 
TL-SL3428(config)# interface gigabitEthernet 1/0/28 
TL-SL3428(config-if)# media-type sfp 
duplex 
Description 
The duplex command is used to configure the Duplex Mode for an Ethernet 
port. To return to the default configuration, please use no duplex command. 
Syntax 
duplex { full | half } 
no duplex 
Parameter   
full | half —— The duplex mode of the Ethernet port. There are two options: 
full-duplex mode (default) and half-duplex mode. 
Command Mode 
Interface Configuration Mode (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example