TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

139

 

With loopback detection feature enabled, the switch can detect loops using loopback detection 

packets. When a loop is detected, the switch will display an alert or further block the corresponding 

port according to the configuration. 

The  loopback-detection command is used to enable the loopback detection 

function globally. To disable it, please use no loopback detection command. 

Global Configuration Mode 

Enable the loopback detection function globally: 

The  loopback-detection interval command is used to define the interval of 

sending loopback detection packets from switch ports to network, aiming at 

detecting network loops periodically. 

interval-time  ——  The interval of sending loopback detection packets. It ranges 

from 1 to 1000 seconds. By default, this value is 30. 

Global Configuration Mode