Manualsbrain.com
  1. Manuales
  2. Marcas
  3. TP-LINK
  4. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch
  5. Hoja De Datos

TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

Los códigos de productos
TL-SL3428
Descargar
Página de 232
TL-SL3428/TL-SL3452
JetStream L2 Managed Switch CLI Guide
 
144
 
Chapter 23  ACL Commands 
ACL (Access Control List) is used to filter data packets by configuring a series of match conditions, 
operations and time ranges. It provides a flexible and secured access control policy and facilitates 
you to control the network security. 
time-range 
Description 
The  time-range command is used to add Time-Range. To delete the 
corresponding Time-Range, please use no time-range command. A time-range 
based ACL enables you to implement ACL control over packets by 
differentiating the time-ranges. A time-range can be specified in each rule in an 
ACL. The rule takes effect only when the specified time-range is configured and 
the system time is within the time-range. 
Syntax 
time-range name 
no time-range name 
Parameter 
name  ——  The Time-Range name, ranging from 1 to 16 characters. 
Command Mode 
Global Configuration Mode 
Example 
Add a time-range named tSeg1: 
TL-SL3428(config)# time-range tSeg1 
absolute 
Description 
The absolute command is used to configure a time-range into an absoluteness 
mode. To delete the corresponding Absoluteness Mode time-range, please use 
no absolute command.