TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

6

 

6.  The DOS prompt” TL-SL3428>” will appear after pressing the Enter button as Figure 1-5 

shown. It indicates that you can use the CLI now. 

 

Figure 1-5 Log in the Switch 

To successfully create Telnet connection, firstly CLI commands about configuring Telnet login 
mode, login authentication information and Privileged EXEC Mode password should be configured 
through Console connection.   

Telnet login has the following two modes, you can choose one according to your needs:   

Login Local Mode: It requires username and password, which are both admin by default. 

Login Mode: It requires no username and password, but a connection password is required. 

1.  Before Telnet login, you are required to configure Telnet login mode and login 

authentication information through Console connection. The relevant CLI commands 

should be entered in the prompted DOS screen shown in Figure 1-5 Log in the Switch. 

2.  You will enter to User EXEC Mode after Telnet connection is successfully created, but for 

switch security concerns, you are required to set a password which functions to further 

access to Privileged EXEC Mode when you configure the login mode. 



  Login Local Mode:

 

 

Firstly, configure the Telnet login mode as “login local” and set the password for entering into the 

Privileged EXEC Mode as 123 in the prompted DOS screen shown in Figure 1-5. 

 

Figure 1-6 Configure login local mode