TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos
Los códigos de productos
TL-SL3428
TL-SL3428/TL-SL3452
JetStream L2 Managed Switch CLI Guide
179
the format of 1/0/2; Gigabit Ethernet port, ranging from 1-4, in the format of
1/0/2.
vlan-id —— The VLAN ID of the multicast IP, ranging from 1 to 4094.
ip —— The static multicast IP address.
port-list —— The forward port list of the multicast group.
Command Mode
Global Configuration Mode
Example
Enable the IGMP Snooping function and modify Member Port Time as 200
seconds for VLAN1-3:
TL-SL3428(config)#ip igmp snooping vlan-config 1-3 mtime 200
ip igmp snooping multi-vlan-config
Description
The ip igmp snooping multi-vlan-config command is used to create and
configure a Multicast VLAN. To delete the corresponding Multicast VLAN,
please use no ip igmp snooping multi-vlan-config command.
Syntax
ip igmp snooping multi-vlan-config [vlan-id] { rtime router-time | mtime
member-time | ltime leave-time | rport interface { fastEthernet port |
gigabitEthernet port } }
no ip igmp snooping multi-vlan-config
Parameter
vlan-id —— The ID of the VLAN desired to modify configuration, ranging from 2
to 4094.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
leave-time —— Leave Time, which is the interval between the switch receiving