TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

189

 

smode  —— Security Model, with v1、v2c and v3 options. They represent 
SNMP v1, SNMP v2c and SNMP v3.   

slev  —— The Security Level of SNMP v3 Group. There are three options, 
including noAuthNoPriv（no authorization and no encryption）、authNoPriv
（

authorization and no encryption） and authPriv（authorization and encryption）. 

By default, the Security Level is noAuthNoPriv. There is no need to configure 
this in SNMP v1 Model and SNMP v2c Model.   

read  ——  Read-only view. The management access is restricted to read-only, 
and changes cannot be made to the assigned SNMP View. 

write  — —  Write-only view. The management access is writing only and 
changes can be made to the assigned SNMP View. The View defined both as 
the Read View and the Write View can be read and modified. 

notify  —— Notify view. The management station software can receive trap 
messages of the assigned SNMP view generated by the Switch's SNMP agent. 

Global Configuration mode 

Add group 1, and configure the Security Model as SNMP v3, the security level 
as authNoPriv, the management access to the assigned View viewDefault as 
read-write, besides the trap messages sent by View viewDefault can be 
received by Management station: 

TL-SL3428(config)#snmp-server group group1 smode v3 slev authNoPriv 

read viewDefault write viewDefault notify viewDefault 

Delete Group group 1:   

TL-SL3428(config)#no snmp-server group group1 smode v3 slev authNoPriv 

The  snmp-server user command is used to add User. To delete the 

corresponding User, please use no snmp-server user command. The User in 

an SNMP Group can manage the switch via the management station software. 

The User and its Group have the same security level and access right. 

snmp-server user name { local | remote } group-name [smode { v1 | v2c | v3 }] 

[slev { noAuthNoPriv | authNoPriv | authPriv }] [cmode { none | MD5 | SHA }] 

[cpwd confirm-pwd] [emode { none | DES }] [epwd encrypt-pwd]