Manualsbrain.com
  1. Manuales
  2. Marcas
  3. TP-LINK
  4. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch
  5. Hoja De Datos

TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

Los códigos de productos
TL-SL3428
Descargar
Página de 232
TL-SL3428/TL-SL3452
JetStream L2 Managed Switch CLI Guide
 
44
 
no user access-control 
Parameter 
mac-addr —— The source MAC address. Only the user with this MAC address 
is allowed to login. 
Command Mode 
Global Configuration Mode 
Example 
Configure that only the user with the MAC address 00:00:13:0A:00:01 is allowed 
to login: 
TL-SL3428(config)#user access-control mac-based 00:00:13:0A:00:01 
user access-control port-based 
Description 
The  user access-control port-based command is used to limit the ports for 
login.
 
Only the users connected to these ports you set here are allowed for login. 
To cancel the user access limit, please use no user access-control command. 
Syntax 
user access-control port-based interface { fastEthernet port | gigabitEthernet 
port | range fastEthernet port-list | range gigabitEthernet port-list } 
no user access-control 
Parameter 
port 
——
  The Fast/Gigabit Ethernet port number. 
port-list ——The list group of Ethernet ports. You can appoint 5 ports at most.   
Command Mode 
Global Configuration Mode 
Example 
Configure that only the users connected to Fast Ethernet ports 2-6 are allowed to 
login: 
TL-SL3428(config)#user access-control port-based interface range 
 
fastEthernet 1/0/2-6