TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

50

 

You can bind the IP address, MAC address, VLAN and the connected Port number of the Host 

together, which can be the condition for the ARP Inspection and IP verify source to filter the 

packets. 

The ip source binding command is used to bind the IP address, MAC address, 

VLAN ID and the Port number together manually.

You can manually bind the IP 

address, MAC address, VLAN ID and the Port number together in the condition 

that you have got the related information of the Hosts in the LAN. To delete the 

IP-MAC –VID-PORT entry from the binding table, please use no ip source 

binding index command. 

ip source binding hostname ip-addr mac-addr  vlan  vid  interface 

{  fastEthernet  port | gigabitEthernet  port } { none | arp-detection } 

[ forced-source {arp-scanning | dhcp-snooping} ] 

no ip source binding index idx 

hostname ——The Host Name, which contains 20 characters at most. 

ip-addr —— The IP address of the Host. 

mac-addr —— The MAC address of the Host. 

vid ——The VLAN ID needed to be bound, ranging from 1 to 4094.   

port —— The number of port connected to the Host. 

none | arp-detection ——The protect type for the entry. “arp-detection” indicates 

ARP detection. 

forced-source —— The source of the binding entry can be specified as 

“arp-scanning” or “dhcp-snooping”. It is multi-optional. 

idx —— The entry number needed to be deleted. You can use the 

 command to get the idx. Pay attention that the entry number is 

the actual number in the binding table which is not display in an arranged order.