TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

78

 

The logging file flash command is used to configure the level and the status of 

the log file input. To disable the logging file flash funtion, please use no logging 

file flash command. The log file indicates the flash sector for saving system log. 

The information in the log file will not be lost after the switch is restarted and can 

be got by the 

 command. 

logging file flash level 

level —— Severity level of the log information output to each channel.

There 

are 8 severity levels marked with values 0-7. The smaller value has the higher 

priority. Only the log with the same or smaller severity level value will be output. 

By default, it is 4 indicating that the log information marked with 0~4 will be 

saved in the log buffer. 

Global Configuration Mode 

Enable the log file function and set the severity as 7: 

TL-SL3428(config)#logging file flash 7 

The clear logging command is used to clear the information in the log buffer 

and log file.   

clear logging [ buffer | flash ]