TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos
Los códigos de productos
TL-SL3428
Action Mode:
Select the action mode to process multicast packets when the
multicast IP is in the filtering IP-range.
multicast IP is in the filtering IP-range.
Permit: Only the multicast packets whose multicast IP is in the
IP-range will be processed.
Deny: Only the multicast packets whose multicast IP is not in
the IP-range will be processed.
Bound IP-Range (ID):
Enter the IP-rang ID the port will be bound to.
Max Groups:
Specify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.
ports taking up too much bandwidth.
LAG:
Displays the LAG number which the port belongs to.
Note:
1. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
2. Multicast Filter feature has no effect on static multicast IP.
3. Up to 15 IP-Ranges can be bound to one port.
Configuration Procedure:
Step Operation
Description
1 Configure
IP-Range
Required.
Configure IP-Range to be filtered on
Multicast→Multicast Filter→IP-Range page.
2
Configure multicast filter
rules for ports
rules for ports
Optional. Configure multicast filter rules for ports on
Multicast→Multicast Filter→Port Filter page.
Multicast→Multicast Filter→Port Filter page.
8.4 Packet Statistics
On this page you can view the multicast data traffic on each port of the switch, which facilitates you
to monitor the IGMP messages in the network.
to monitor the IGMP messages in the network.
Choose the menu Multicast→Packet Statistics to load the following page.
108