TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

Enter the hop count the switch topology collects. The default is 3 
hops. 

Enter the time between the switch receiving NTDP request 
packets and the switch forwarding NTDP request packets for the 
first time. The default is 200 milliseconds. 

Enter the time between the port forwarding NTDP request packets 
and its adjacent port forwarding NTDP request packets over. The 
default is 20 milliseconds. 



Select the desired port for NTDP status configuration. 

 

Displays the port number of the switch. 

 

Displays NTDP status (enabled or disabled) of the current port. 

 

Click the Enable button to enable NTDP feature for the port you 
select. 

 

Click the Disable button to disable NTDP feature for the port you 
select. 

 

NTDP function is effective only when NTDP function is enabled globally and for the port.   

A commander switch can recognize and add the candidate switch to a cluster automatically based 
on NDP and NTDP. You can manually add the candidate switch to a cluster. If the candidate switch 
is successfully added to the cluster, it will get a private IP address assigned by the commander 
switch. You can manage and configure the member switch via the commander switch. 

The Cluster function can be implemented on Cluster Summary and Cluster Config pages. 

On this page you can view the status of the current cluster. 

Choose the menu Cluster→Cluster→Cluster Summary to load the following page. 



 

For a candidate switch, the following page is displayed: 

 

Figure 14-9 Cluster Summary for Candidate Switch 

204