TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

informational 6 

Informational messages 

debugging 7 

Debug-level messages 

Table 15-1 Log Level 

The Log function is implemented on the Log Table, Local Log, Remote Log and Backup Log 
pages.  

The switch supports logs output to two directions, namely, log buffer and log file. The information 
in log buffer will be lost after the switch is rebooted or powered off whereas the information in log 
file will be kept effective even the switch is rebooted or powered off. Log Table displays the system 
log information in log buffer. 

Choose the menu Maintenance→Log→Log Table to load the following page. 

 

Figure 15-3 Log Table 

The following entries are displayed on this screen: 



Displays the index of the log information. 

Displays the time when the log event occurs. The log can get the 
correct time after you configure on the System ->System 
Info->System Time Web management page. 

Displays the module which the log information belongs to. You can 
select a module from the drop-down list to display the corresponding 
log information.   

Displays the severity level of the log information. You can select a 
severity level to display the log information whose severity level value 
is the same or smaller. 

Displays the content of the log information. 

1.  The logs are classified into eight levels based on severity. The higher the information severity 

is, the lower the corresponding level is.   

2.  This page displays logs in the log buffer, and at most 512 logs are displayed.   

212