TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

Displays the Pair number. 

Displays the connection status of the cable connected to the port. The
test results of the cable include normal, close, open, short, impedance
or unknown.   

If the connection status is normal, here displays the length range of
the cable. 

If the connection status is close, open or impedance, here displays the
error length of the cable.   

1.  The Length displayed here is the length of pair cable not that of the physical cable. 

2.  The test result is just for your reference. 

Loopback test function, looping the sender and the receiver of the signal, is used to test whether 
the port of the switch is available as well as to check and analyze the physical connection status of 
the port to help you locate and solve network malfunctions.   

Choose the menu Maintenance→Device Diagnostics→Loopback to load the following page. 

 

Figure 15-8 Loopback 

The following entries are displayed on this screen: 



Select Internal to test whether the port is available. 

Select External to test whether the device connected to the port
of the switch is available   

216