TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

Displays the port number. 

Give a description to the port for identification. 

Allows you to Enable/Disable the port. When Enable is
selected, the port can forward the packets normally.   

Select the Speed and Duplex mode for the port. The device
connected to the switch should be in the same Speed and
Duplex mode with the switch. When “Auto” is selected, the
Speed and Duplex mode will be determined by
auto-negotiation. For the SFP port, this switch does not support 
auto-negotiation. 

Allows you to Enable/Disable the Flow Control feature. When 
Flow Control is enabled, the switch can synchronize the speed
with its peer to avoid the packet loss caused by congestion. 

Displays the LAG number which the port belongs to. 

1. 

The switch can not be managed through the disabled port. Please enable the port which is 
used to manage the switch. 

2. 

The parameters of the port members in a LAG should be set as the same. 

3. 

For TL-SL3428, when using the SFP port with a 100M module or a gigabit module, you need 
to configure its corresponding Speed and Duplex mode. For 100M module, please select 
100MFD while select 1000MFD for gigabit module. By default, the Speed and Duplex mode 
of SFP port is 1000MFD. 

Port Mirror, the packets obtaining technology, functions to forward copies of packets from 
one/multiple ports (mirrored port) to a specific port (mirroring port). Usually, the mirroring port is 
connected to a data diagnose device, which is used to analyze the mirrored packets for monitoring 
and troubleshooting the network. 

Choose the menu Switching→Port→Port Mirror to load the following page. 

31