TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos

 

 

Figure 6-9 Enable Protocol VLAN for Port 

Select your desired port for Protocol VLAN feature. All the ports are
disabled by default.   

Configuration Procedure: 

1 

Set the link type for port. 

Required.  On  the  VLAN→802.1Q VLAN→Port Config 
page, set the link type for the port basing on its connected 
device.  

2 

Create VLAN. 

Required. On the VLAN→802.1Q VLAN→VLAN Config 
page, click the Create button to create a VLAN. Enter the 
VLAN ID and the description for the VLAN. Meanwhile, 
specify its member ports. 

3  Create 

Protocol 

Template. 

Required. On the VLAN→Protocol VLAN→Protocol 
Template page, create the Protocol Template before 
configuring Protocol VLAN. 

4 

Select your desired ports for 
Protocol VLAN feature.   

Required. On the VLAN→Protocol VLAN→Port Enable 
page, select and enable the desired ports for Protocol 
VLAN feature. 

5 

Create Protocol VLAN. 

Required.  On  the  VLAN→Protocol VLAN→Protocol 
VLAN page, select the protocol type and enter the VLAN ID 
to create a Protocol VLAN. 

6 

Modify/View VLAN. 

Optional. On the VLAN→Protocol VLAN→Protocol VLAN 
page, click the Edit button to modify/view the information of 
the corresponding VLAN. 

7 

Delete VLAN. 

Optional. On the VLAN→Protocol VLAN→Protocol VLAN 
page, select the desired entry to delete the corresponding 
VLAN by clicking the Delete button. 

GVRP (GARP VLAN Registration Protocol) is an implementation of GARP (generic attribute 
registration protocol). GVRP allows the switch to automatically add or remove the VLANs via the 
dynamic VLAN registration information and propagate the local VLAN registration information to 
other switches, without having to individually configure each VLAN. 

64