TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Hoja De Datos
Los códigos de productos
TL-SL3428
Configuration Procedure:
Step Operation
Description
1
Set the link type for port.
Required. On the VLAN→802.1Q VLAN→Port Config
page, set the link type of the port to be TRUNK.
page, set the link type of the port to be TRUNK.
2
Enable GVRP function.
Required. On the VLAN→GVRP page, enable GVRP
function.
function.
3 Configure the registration
mode and the timers for the
port.
port.
Required. On the VLAN→GVRP page, configure the
parameters of ports basing on actual applications.
parameters of ports basing on actual applications.
6.4 Application Example for 802.1Q VLAN
Network Requirements
Switch A is connecting to PC A and Server B;
Switch B is connecting to PC B and Server A;
PC A and Server A is in the same VLAN;
PC B and Server B is in the same VLAN;
PCs in the two VLANs cannot communicate with each other.
Network Diagram
Configuration Procedure
Configure Switch A
Step
Operation
Description
1 Configure
the
Link Type of the
ports
ports
Required. On VLAN→802.1Q VLAN→Port Config page, configure
the link type of Port 2, Port 3 and Port 4 as ACCESS, TRUNK and
ACCESS respectively
the link type of Port 2, Port 3 and Port 4 as ACCESS, TRUNK and
ACCESS respectively
68