Samsung LE-37A686M1FXXU Manual De Usuario

1.  Press the tOOLS button. 

Then press the 

ENtER  button to select "Anynet+(HDMI-

CEC)".

2.  Press the ▲ or ▼ button to select "Select Device", then press 

the 

ENtER  button.

.  Press the ▲ or ▼ button to select to a particular device and 

press the 

ENtER  button. It is switched to the selected device.

.  If you cannot find a device you want, press the ▲ or ▼ button to 

select "Setup", then press the 

ENtER  button.

.  Press the ▲ or ▼ button to select "Searching Connections", 

then press the 

ENtER  button.

 

The message "Configuring Anynet+ connection..."

 is displayed. 

When searching devices completes, the connected devices are 

listed in the Anynet+ menu.

Switching to the selected devices may take up to 2 minutes. 

You cannot cancel the operation during the switching 

operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of found devices is not displayed.
Although the TV automatically scans devices when it is turned on using the 

POWER button, devices 

connected when the TV is on or under a specific circumstance are not displayed in the device list. 

Therefore select "Searching Connections" menu to search devices.
If you have selected external input mode by pressing the 

SOURCE button, you cannot use the 

Anynet+ function. Make sure to switch to an Anynet+ device by using the 

tOOLS button. 

 

➣

➣
➣
➣

➣



















BN68-01684A-00Eng.indd   57

2008-07-02   �� 3:32:28