Reely Hendheld RC 2.4 GHz No. of channels: 4 1310036 Manual De Usuario
Los códigos de productos
1310036
4
3. Intended Use
The 4-channel remote control „HT-4“ is solely designed for private use in the field of model construction and the
operating times associated with it. This system is not suitable for industrial use, such as controlling machines or
equipment.
Any use other than that described above can damage the product and involves additional risks such as short circuit,
Any use other than that described above can damage the product and involves additional risks such as short circuit,
fire, electric shock, etc. The product must not be technically changed or converted! The safety information must be
observed at all times!
Observe all safety information in these operating instructions. They contain important information on hand-
ling of the product.
You are solely responsible for the safe operation of your remote control and your model!
4. Product Description
The 4-channel remote control system „HT-4“ is a radio control system that is mainly ideal for controlling model planes.
If necessary, the remote control can also be used to control model vehicles, model ships or simple 4-channel model
helicopters (speed-controlled).
The four proportional control channels can be used to remote-control the different control functions independently of
The four proportional control channels can be used to remote-control the different control functions independently of
each other. The ergonomic casing fits comfortably into your hand and allows for easy and safe operation of the model
and the transmitter.
For operation, 4 AA/mignon batteries (e.g. Conrad item no. 652507, pack of 4, order 1x) are required for the trans-
For operation, 4 AA/mignon batteries (e.g. Conrad item no. 652507, pack of 4, order 1x) are required for the trans-
mitter.
Where no flight controller with BEC switch is used, you also need 4 AA/mignon batteries for the receiver (e.g. Conrad
Where no flight controller with BEC switch is used, you also need 4 AA/mignon batteries for the receiver (e.g. Conrad
item no. 652507, order once) or 4 AA/mignon rechargeable batteries with the corresponding battery holder. Alter-
natively, 4- or 5-cell NiMH receiver batteries (rated voltage 4.8 - 6.0 V) can also be used with the switch cable. The
receiver may also be operated with a 2-cell LiPo battery (rated voltage 7.4 V), but the connected servos also must be
high-voltage-capable.
5. Scope of Delivery
• Remote Control Transmitter
• Remote control receiver
• Binding plug
• Operating instructions on CD
• Remote control receiver
• Binding plug
• Operating instructions on CD