Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Hoja De Datos
Los códigos de productos
1-F8075
19
<Before Use>
SD Card (Secure Digital memory card) (Not
included)
The T14SG transmitter model data can be stored
by using any commonly found SD card. When
T14SG transmitter update software is released, the
software is updated using an SD card. The T14SG
is capable of using SD cards with a memory size
SD : 32MB-2GB SDHC : 4GB-32GB.
Inserting/removing the SD card
1. Turn off the transmitter power and then
open the battery cover at the bottom of the
transmitter.
2. The SD card slot is show here in the figure
below.
Caution
Be sure to turn off the power to the
transmitter before inserting or removing
the SD card.
As the SD card is a precision device, do
not use excessive force when inserting.
Restrictions when using an SD card
The following restrictions apply when using an
SD card:
*The SD card must first be initialized using the T14SG
dedicated format. The SD card cannot be used as is without
formatting to the T14SG.
*Initializing destroys all the data previously saved on the
card.
*An SD card formatted to the T14SG cannot be written
directly from a PC by Windows Explorer, etc. The files
must be converted and written by the Futaba File System
software. Files are identified by number instead of name.
This special conversion software can be downloaded from
Futaba's web site at:
http://www.futaba-rc.com/software-updates.html
① Push to open.
②Slide in the direction of the
arrow on the battery cover.
③ Battery cover will open downward.
SD card slot