Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Hoja De Datos

When turning on the power, the T14SG 

transmitter will begin emmiting RF automatically 

after it confirms the surrounding RF conditions. 

The T14SG transmitter also offers the ability to 

auto shut-down.
When turning on the power of the transmitter

1. Turn on the power switch of the transmitter.

*The message "CHECK RF CONDITION" is displayed for a 

moment. At the same time the left LED monitor blinks.

2. Then, you will see the home screen and the 

transmitter begins to emit radio waves.

*The left and right LED monitors will change to solid red.

1. Turn off the power switch of the transmitter.

*The transmitter shuts down at once.

When the battery voltage reaches 5.2V, an 

audible  alarm  will  sound.  Land  your  aircraft 

immediately.

When the battery voltage reaches 3.9V, the 

transmitter will be turned off automatically.

*If you do not operate the transmitter (or move a stick, 

knob, switch or digital trim) for 30 minutes, the message 

"PLEASE TURN OFF POWER SWITCH" is displayed and 

an audible alarm will sound.

When the throttle stick during Power On is at 

the high side (or over 1/3 stick) a warning will be 

displayed. 

*below 1/3 stick, the warning display goes off.

If so desired, the T14SG transmitter can 

indicate the owner's name. 

1. Turn on the power of the transmitter.

*The home screen appears.

2. Lightly touch the SYS button twice rapidly 

and the System menu appears.

3. Select [USER NAME] in the System menu and 

touch the RTN button.

*The user name set up screen appears.

 

Input Box

*Current user name is displayed.     

1. Change the user name as described below:
  [Moving cursor in input box]
 Select [←] or [→], and touch the RTN button.
  [Deleting a character]
  When [DELETE] is selected and the RTN button 

is touched, the character immediately after 

the cursor is deleted.

  [Adding a character]
  When a character is selected from the 

character list and the RTN button is touched, 

that character is added at the position 

immediately after the cursor.

*A name of up to 10 characters long can be entered as the 

user name. (A space is also counted as one character.)

2. At the end of input, select [ENTER] and tuoch 

the RTN button. (To terminate input and 

return to the original state, select [CANCEL] 

and touch the RTN button.)

THR Stick Slow