Renkforce 808576 Wireless Surveillance System 808576 Hoja De Datos
Los códigos de productos
808576
58
• Confirm the setting with „
“.
• If required, push the button „MENU“ repeatedly to return to the respective previous menu or to leave the
OSD menu.
Function „Schedule recording“
The screen/DVR can record automatically between two settable times, e.g. between 8 AM and 5 PM. In
The screen/DVR can record automatically between two settable times, e.g. between 8 AM and 5 PM. In
the function „Schedule recording“, the start and end time can be set and the automatic recording can be
switched on.
Proceed as follows:
• Use the buttons „4“ and „6“ to pick the function „Schedule recording“ and then push „
Proceed as follows:
• Use the buttons „4“ and „6“ to pick the function „Schedule recording“ and then push „
“.
• Use the buttons „4“ and „6“ to select the desired input position. It is marked red.
Use the buttons „8“ and „2“ to set the hours or minutes.
„Start Time“ = Starting time for recording (hours: minutes)
„End Time“ = End time for recording (hours: minutes)
• To switch the automatic recording function on or off, select „ON“ or „OFF“ and push the button „
Use the buttons „8“ and „2“ to set the hours or minutes.
„Start Time“ = Starting time for recording (hours: minutes)
„End Time“ = End time for recording (hours: minutes)
• To switch the automatic recording function on or off, select „ON“ or „OFF“ and push the button „
“.
„ON“ = switch on automatic recording function
„OFF“ = switch off automatic recording function
• If required, push the button „MENU“ repeatedly to return to the respective previous menu or to leave the
„OFF“ = switch off automatic recording function
• If required, push the button „MENU“ repeatedly to return to the respective previous menu or to leave the
OSD menu.
Function „SD overwrite“
For a full memory card, no new recording can be performed and the memory card must be replaced with a
For a full memory card, no new recording can be performed and the memory card must be replaced with a
new, empty one (or the data on the memory card must be recopied to a computer).
If desired, an overwriting function can be activated, however. The respective oldest recording is then
If desired, an overwriting function can be activated, however. The respective oldest recording is then
replaced by the new one.
Proceed as follows:
• Use the buttons „4“ and „6“ to pick the function „SD overwrite“ and then push „
Proceed as follows:
• Use the buttons „4“ and „6“ to pick the function „SD overwrite“ and then push „
“.
• Use the buttons „4“ and „6“ to switch between „YES“ (overwriting function on) and „NO“ (overwriting
function off).
• Confirm the selection with „
“.
• If required, push the button „MENU“ repeatedly to return to the respective previous menu or to leave the
OSD menu.