Black & Decker CBM210B Manual

Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed, including the following:
❍

Read all instructions.

❍

To protect against risk of electric shock, do not immerse

cord, plug or any non-removable parts in water or other

liquid.

❍

Close supervision is necessary when any appliance is used

by or near children.

❍

Unplug from outlet when not in use, before putting on or

taking off parts and before cleaning. To unplug, grasp plug

and pull from electrical outlet. Never pull cord.

❍

Avoid contacting moving parts.

❍

To reduce the risk of severe injury to persons or damage

to the appliance, keep hands and utensils out of the

grinding bowl while grinding, and when the appliance is

plugged in.

❍

Do not operate any appliance with a damaged cord or

plug or after the appliance malfunctions or is dropped

or damaged in any manner. Return the appliance to the

nearest authorized service facility for examination, repair,

or electrical or mechanical adjustment.

❍

The use of attachments not recommended or sold by the

appliance manufacturer may cause fire, electric shock or

injury.

❍

Do not use outdoors.

❍

Do not let cord hang over edge of table or counter.

❍

Blades are sharp. Handle carefully.

❍

Be certain cover is securely locked in place before

operating appliance.

❍

Do not attempt to defeat the cover interlock mechanism.

❍

Check container for presence of foreign objects before

using.

❍

Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to fit into a polarized

outlet only one way. If the plug does not fit fully into the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. Do not attempt to

modify the plug in any way.
TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw

to prevent removal of the outer cover. To reduce the risk of fire or

electric shock, do not attempt to remove the outer cover. There are

no user-serviceable parts inside. Repair should be done only by

authorized service personnel.

ELECTRICAL CORD

a) A short power-supply cord is to be provided to reduce the risk

resulting from becoming entangled in or tripping over a

longer

cord.

b) Longer extension cords are available and may be used

if care is exercised in their use.

c) If an extension cord is used,

1) The marked electrical rating of the detachable

power-supply cord or extension cord should be at

least as great as the electrical rating of the appliance,

2) If the appliance is of the grounded type, the extension cord

should be a grounding-type 3-wire cord, and

3) The longer cord should be arranged so that it will not drape

over the countertop or tabletop where it can be pulled on by

children or tripped over.

Note: If the power supply cord is damaged, it should be replaced

by qualified personnel or in Latin America by an authorized service

center.

How to Use

This product is for household use only.
GETTING STARTED
•  Wash removable parts as instructed in CARE AND CLEANING.
•  When in use, grinder must be placed on a level surface.
•  To assure stability, thread electrical cord to one side of cord wrap,

then through the channel with cord exiting out the rear of the base.

Note: For your protection, appliance contains a dual safety

mechanism. Do not attempt to use appliance unless the cover is

closed and ground coffee container is in place.
GRINDING
1. Open grinding bowl cover.
2. Place up to 1 cup (about 227 g) of coffee beans into grinding bowl.

This yields about 16 tablespoons (277 g) of ground coffee—enough

for about 12 cups (2 L ). Do not grind a full cup of beans on the fine

setting as it may cause unit to clog.

3. Turn grind selection dial to desired grind texture. Refer to

GRINDING GUIDELINES. Experiment with the texture of your grind

to see what works best with your coffeemaker.

4. Plug in the grinder.
5. Press and hold the ON/OFF ( ) pulse control button until beans are

ground.

GRINDING GUIDELINES
Selecting grind setting:
Brew Method

Grind

Setting Appearance

Percolator or

Coarse

Like Kosher salt

French Press
Drip or Vacuum

Medium

Like coarse-ground pepper

Espresso

Fine

Like fine bread crumbs

The proper grind is important for the best coffee flavor. The quicker

the brewing process, the finer the grind used. Coffee that is ground

too fine for a particular brewing process will result in bitter, pungent

tasting coffee. Coffee that is ground too coarse will result in weak,

watery coffee.
Grind time and yield:
Amount of beans

Time

Yield

¼ cup (57 g)

30 to 35 seconds

4 tbsp.

½ cup (113 g)

50 to 55 seconds

8 tbsp.

¾ cup (170 g)

60 to 65 seconds

12 tbsp.

1 cup (227 g)

approximately

16 tbsp.

1½ minutes

6. When grinding is done, remove ground coffee container from

the grinder by pulling it away from unit; lift lid up and off. Scoop

directly from the ground coffee container.

Care and Cleaning

This product contains no user serviceable parts. Refer service to

qualified service personnel.
1. Always unplug the unit before cleaning.
2. Remove ground coffee container with lid and wash in warm, soapy

water by hand.

3. Use cleaning brush to sweep away any excess particles left in the

ground coffee chute.

Important: The ground coffee chute must be kept clear, or the ground

coffee container will not lock into position once it is replaced, and the

grinder will not operate properly.
4. Open grinding bowl cover and turn the lock-and-release knob

clockwise to unlock the grinding assembly. You will hear a series of

clicks and the grind selection dial will rotate as you twist;, and then a

distinct pop when the assembly is unlocked.

5. Remove grinding assembly and wash in warm, soapy water. Rinse

and dry thoroughly. You can use cleaning brush to sweep out any

excess particles gathered under grinding assembly. Once all excess

particles have been removed, wash in warm soapy water.

7. Wipe the grinding bowl, cover, base and other parts with a slightly

damp cloth or sponge. Dry all parts thoroughly before reassembling.

8. To replace grinding assembly, set inside grinding bowl and twist

slightly to the left until it falls into place. Grasp lock-and-release

knob and turn counterclockwise to lock assembly. You will hear a

series of clicks as the grind selection dial rotates, and then a distinct

pop once the assembly is locked in place.

Important: Do not immerse grinding bowl, base or plug in liquid or

under running water.
9. Never use harsh detergents or abrasive cleansers or scouring pads

to clean any part.

10. Use the built-in cord wrap on the underside of the unit to store the

cord.

is a registered trademark of The Black & Decker Corporation,

Towson, Maryland, USA

Made and Printed in People’s Republic of China

Product may vary slightly from what is illustrated.

MODEL CBM210B

USA/Canada 1-800-231-9786

Accessories/Parts 1-800-738-0245

Register your product at www.prodprotect.com/applica

ELECTRIC COFFEE GRINDER

†  1.  Cover (Part # CBM200-01)
  2.  Lock and release knob
  3.  Grinding bowl
  4.  Ground coffee chute
†  5.  Ground coffee container (Part # CBM200-02)

with lid (Part # CBM200-03)

  6.  Base
  7.  Cord
†  8.  Cleaning brush (Part # CBM200-04)
  9.  ON/OFF pulse control button ( )
  10.  Grind selection dial
  11.  Grinding assembly
Note: † indicates consumer replaceable/removable parts

2011/2-3-10E/S























NEED HELP?

For service, repair or any questions

regarding your appliance, call the

appropriate 800 number in front of

this sheet. Please DO NOT return

the product to the place of purchase.

Also, please DO NOT mail product

back to manufacturer, nor bring it to

a service center. You may also want

to consult the website listed on the

cover of this manual.

TWO-YEAR LIMITED WARRANTY

(Applies only in the United States

and Canada)

What does it cover?

• Any defect in material or

workmanship provided; however,

Applica’s liability will not exceed

the purchase price of product.

For how long?

• Two years from the date of original

purchase with proof of such

purchase.

What will we do to help you?

• Provide you with a reasonably

similar replacement product

that is either new or factory

refurbished.

How do you get service?

• Save your receipt as proof of date

of sale.

• Visit the online service website at

www.prodprotect.com/applica, or

call toll-free 1-800-231-9786, for

general warranty service.

• If you need parts or accessories,

please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use

• Damage from misuse, abuse or

neglect

• Products that have been modified

in any way

• Products used or serviced outside

the country of purchase

• Glass parts and other accessory

items that are packed with the

unit

• Shipping and handling costs

associated with the replacement

of the unit

• Consequential or incidental

damages (Please note, however,

that some states do not allow

the exclusion or limitation of

consequential or incidental

damages, so this limitation may

not apply to you.)

How does state law relate to this

warranty?

• This warranty gives you specific

legal rights. You may also have

other rights that vary

from state to

state or province to province.