Creative Wireless Adapter CB3200 Manual De Usuario
30
On subsequent appearances of this dialog box, the PIM selection option is not available.
Change the Selected PIM
On the PIM Item Transfer properties page, Received items section, there is a Business Cards
shortcut menu. When a PIM was selected during initial setup the selected item in this menu
was set to the same PIM. To change the PIM used for the default business card, open this
shortcut menu and select a new PIM.
Note: A new default business card must be selected from the database of the newly selected
PIM.
Change the Selected PIM
On the PIM Item Transfer properties page, Received items section, there is a Business Cards
shortcut menu. When a PIM was selected during initial setup the selected item in this menu
was set to the same PIM. To change the PIM used for the default business card, open this
shortcut menu and select a new PIM.
Note: A new default business card must be selected from the database of the newly selected
PIM.
Choose a Default Business Card
1. In
the Select a Bluetooth Business Card dialog box that is displayed when
Always send the same business card is selected, select the card.
Note: Move your mouse over a selected business card to display additional
information about that contact.
information about that contact.
2. Click
OK to choose a selected business card and return to the PIM Item Transfer
Properties page. The chosen contact is now displayed and selected in the
Business card requests shortcut menu.
Business card requests shortcut menu.
Note: In addition to the default menu options, the shortcut menu can hold up to ten
contact names. If the Always send the same business card option is selected again,
and a different contact is chosen, the properties page will display both contacts in
the shortcut menu.
contact names. If the Always send the same business card option is selected again,
and a different contact is chosen, the properties page will display both contacts in
the shortcut menu.
PIM Synchronization
The PIM Synchronization service can be used by a remote device to synchronize its Personal
Information Manager (PIM) database with the PIM database of this computer.
Four data types are supported:
Business
cards
Calendar
items
Email
messages
Notes
Whether an individual item is accepted and where it is stored after it is accepted is configured
in the PIM Item Transfer service. If that service is not configured to store a particular data type
in Outlook, then that data type cannot be synchronized.
Microsoft Outlook permits duplicate entries, so all duplicates may not be exchanged in the
synchronization process.
Note: Data types that will be synchronized must be saved in the PIM database (this is
configured in the PIM Item Transfer service); otherwise, that data type will not be available for
selection (it will be dimmed) in the PIM Synchronization configuration settings.
Note: Only Outlook’s default contacts folder is synchronized. Items in sub-folders are not
synchronized. Items that are moved from the default folder to a sub-folder will not be
displayed the next time synchronization takes place.
in the PIM Item Transfer service. If that service is not configured to store a particular data type
in Outlook, then that data type cannot be synchronized.
Microsoft Outlook permits duplicate entries, so all duplicates may not be exchanged in the
synchronization process.
Note: Data types that will be synchronized must be saved in the PIM database (this is
configured in the PIM Item Transfer service); otherwise, that data type will not be available for
selection (it will be dimmed) in the PIM Synchronization configuration settings.
Note: Only Outlook’s default contacts folder is synchronized. Items in sub-folders are not
synchronized. Items that are moved from the default folder to a sub-folder will not be
displayed the next time synchronization takes place.