Whirlpool WET3300XQ Guía De Instalación Rápida

IMPORTANT: Level washer/dryer properly to reduce excess 

noise and vibration.

If washer/dryer is not level, use a 9/16" or 14 mm open-end or  

adjustable wrench to turn jam nuts clockwise on feet until they 

are about 1/2" (13 mm) from the washer/dryer cabinet. Then 

turn the leveling foot clockwise to lower the washer/dryer or 

counterclockwise to raise the washer/dryer. Recheck levelness 

of washer/dryer and repeat as needed.

HELPFUL TIP: You may want to prop up front of washer/dryer 

about 4" (102 mm) with a wood block or similar object that  

will support weight of washer/dryer.

With washer/dryer in its final location, place a level on top 

edges of washer/dryer. Use side seam as a guide to check 

levelness of sides. Check levelness of front using lid, as 

shown. Rock washer/dryer back and forth to make sure all 

four feet make solid contact with floor. If washer/dryer is level, 

skip to step 2. 

Place level here

Place level here

Jam nut

Not Level

Not Level

When washer/dryer is level, use a 9/16" or 14 mm open-end  

or adjustable wrench to turn jam nuts counterclockwise on 

leveling feet tightly against washer/dryer cabinet. 
HELPFUL TIP: You may want to prop washer/dryer with  

a wooden block.

Jam nut