Whirlpool SAWB600JQ0 Manual De Usuario

1. Measure detergent and pour it into the washer. If desired, add 

powdered or liquid color safe bleach. Add extra detergent for 
the Super cycle (on some models).

Drop a sorted load of clothes loosely into your washer. 

■

Load evenly to maintain washer balance. Mix large and 
small items.

■

Items should move easily through the wash water. 
Overloading can cause poor cleaning.

■

To reduce wrinkling of permanent press clothes and some 
synthetic knits, use a large load size to provide more 
space (see step 5).

2. (OPTIONAL STEP) Pour measured liquid chlorine bleach into 

the liquid chlorine bleach dispenser (on some models). 
Bleach will be dispensed automatically during the wash part 
of the cycle.

■

Never use more than 1 cup (250 mL) for a full load. Use 
less with a smaller load size.

■

Follow the manufacturer’s directions for safe use.

■

To avoid spilling, use a cup with a pouring spout. Do not 
let bleach splash, drip, or run down into the washer 
basket.

■

Use only liquid chlorine bleach in this dispenser.

NOTE: On models without a bleach dispenser, see "Adding 
Liquid Chlorine Bleach."

3. (OPTIONAL STEP) Pour measured liquid fabric softener into 

the liquid fabric softener dispenser (on some models). 
Softener is added automatically during the rinse portion of 
the cycle.

Dilute liquid fabric softener by filling the dispenser with warm 
water until liquid reaches the crossbar in the opening.

■

Do not spill or drip any fabric softener on the clothes.

■

Use only liquid fabric softener in this dispenser.

NOTE: On models without a fabric softener dispenser, see 
"Adding Liquid Fabric Softener."

4. Close the washer lid.

5. Turn the LOAD SIZE selector to the correct setting for your 

wash load and the type of fabric being washed.

■

Choose a load size that allows the load to move freely for 
best fabric care. See "Loading".

■

You may change the load size selection after the washer 
has started filling by turning the selector to a different 
setting.