Black & Decker 7662 Manual De Instrucciónes

General

Safety Rules

WARNING:

Read all safety warnings and all instructions.

Failure

to follow the warnings and instructions may result in electric shock,

fire and/or serious injury.

SAve All WARNINGS ANd INStRuctIoNS foR futuRe RefeReNce

The term “power tool” in the warnings refers to your mains-operated (cord-

ed) power tool or battery-operated (cordless) power tool.

1) WoRk AReA SAfety

a) keep work area clean and well lit

. Cluttered or dark areas invite accidents.

do not operate power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases or dust.

Power tools create sparks which may ignite

the dust or fumes.

keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

2) electRIcAl SAfety

Power tool plugs must match the outlet. Never modify the plug in any way. do

not use any adapter plugs with earthed (grounded) power tools.

Unmodified

plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electric shock.

do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor

use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a ground fault

circuit interrupter (GfcI) protected supply.

Use of a GFCI reduces the risk of elec-

tric shock.

3) PeRSoNAl SAfety

Stay alert, watch what you are doing and use common sense when operating a

power tool. do not use a power tool while you are tired or under the influence

of drugs, alcohol or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. ensure the switch is in the off position before

connecting to power source and/ or battery pack, picking up or carrying the

tool.

Carrying power tools with your finger on the switch or energizing power tools

that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench

or a key left attached to a rotating part of the power tool may result in personal injury.

do not overreach. keep proper footing and balance at all times. This enables bet-

ter control of the power tool in unexpected situations.

dress properly. do not wear loose clothing or jewelry. keep your hair, clothing

and gloves away from moving parts.

Loose clothes, jewelry or long hair can be

caught in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used.

Use of dust collection

can reduce dust-related hazards.

PoWeR tool uSe ANd cARe

do not force the power tool. use the correct power tool for your application. The cor-

rect power tool will do the job better and safer at the rate for which it was designed.

do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools.

Such preventive safety measures reduce the risk of starting the power

tool accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s oper-

ation. If damaged, have the power tool repaired before use.

Many accidents are

caused by poorly maintained power tools.

keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

use the power tool, accessories and tool bits, etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed.

Use of the power tool for operations different from those intended could

result in a hazardous situation.

5) SeRvIce

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts.

This will ensure that the safety of the power tool is maintained.

Specific Safety Rules

• Hold power tool by insulated gripping surfaces, when performing an operation

where the cutting accessory may contact hidden wiring or its own cord.

Cutting

accessory contacting a “live” wire may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

• use clamps or another practical way to secure and support the work piece to a

stable platform.

Holding the work by hand or against your body leaves it unstable and

may lead to loss of control.

• keep hands away from cutting area. Never reach underneath the material for any rea-

son. Hold front of saw by grasping the contoured gripping area. Do not insert fingers or

thumb into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the

saw by gripping the shoe.

• keep blades sharp. Dull blades may cause the saw to swerve or stall under pressure.

• When cutting pipe or conduit ensure that they are free from water, electrical wiring, etc.

• Allow the motor to come to a complete stop before withdrawing the blade from the

kerf (the slot created by cutting).

A moving blade may impact the workpiece causing a

broken blade, workpiece damage or loss of control and possible personal injury.

• Never hold work in your hand, lap or against parts of your body when sawing. The

saw my slip and the blade could contact the body causing injury.

• keep handles dry, clean, free from oil and grease. This will enable better control of the tool.

• use extra caution when cutting overhead and pay particular attention to overhead

wires which may be hidden from view.

Anticipate the path of falling branches and

debris ahead of time.

• clean out your tool often, especially after heavy use. Dust and grit containing metal

particles often accumulate on interior surfaces and could create an electric shock hazard.

• do not operate this tool for long periods of time. Vibration caused by the operating

action of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to

provide extra cushion, take frequent rest periods, and limit daily time of use.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

•

lead from lead-based paints,

•

crystalline silica from bricks and cement and other masonry products, and

•

arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are specially designed to filter

out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,

and other construction activities. Wear protective clothing and wash exposed areas

with soap and water.

Allowing dust to get into your mouth, eyes, or lay on the skin may

promote absorption of harmful chemicals.

WARNING:

Use of this tool can generate and/or disperse dust, which may cause serious

and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory

protection appropriate for the dust exposure. Direct particles away from face and body.

cAutIoN: Wear appropriate hearing protection during use. under some conditions

and duration of use, noise from this product may contribute to hearing loss.

The label on your tool may include the following symbols.

V ..................volts A ...................amperes
Hz ................hertz W ..................watts
min ..............minutes

or AC ......alternating current

or DC.....direct current

no .................no load speed

................Class I Construction

..................earthing terminal

(grounded)

................safety alert symbol

................Class II Construction

.../min or rpm ....revolutions or reciprocation

(double insulated)

per minute

SPM ............Strokes per minute

cAt. No. 7662

foRM No. 90590169

AuG. 2012

Printed in china

veA el eSPA—ol eN lA coNtRAPoRtAdA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

AdveRteNcIA:

LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

INStRuctIoN MANuAl

Single Speed Jigsaw

catalog Number

7662

features - figure A

1. Single speed switch

2. Lock-on button

3. Saw blade clamp

4. Saw blade clamp screws

5. Saw blade support roller

6. Dust blower

7. Shoe plate

8. Saw blade storage compartment

thank you for choosing Black & decker!

Go to www.Blackanddecker.com/Newowner

to register your new product.

PleASe ReAd BefoRe RetuRNING tHIS

PRoduct foR ANy ReASoN:

If you have a question or experience a problem with your Black & Decker purchase, go to

HttP://WWW.BlAckANddeckeR.coM/INStANtANSWeRS

If you can’t find the answer or do not have access to the internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.

Please have the catalog number available when you call.

for instant answers 24 hours a day.

SAve thiS inStruction MAnuAl for future reference.

SAfety GuIdelINeS - defINItIoNS

It is important for you to read and understand this manual. The information it contains

relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below

are used to help you recognize this information.

dANGeR:

Indicates an imminently hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING:

Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

cAutIoN:

Indicates a potentially haz ard ous situation which, if not avoided, may

result in minor or mod er ate injury.

NotIce:

Used without the safety alert symbol indicates potentially hazardous situation

which, if not avoided, may result in property damage.