Black Box KV1702C Prospecto

Receive Modules (product code KV1702C) and their companion Transmit Modules (KV1701C) are the
components of the ServSwitch Multi Hub (KV170RA) that handle its communication with other ServSwitch
Multi units. Here’s how to configure and install your Receive Module:

1. First—before you do anything else—plan your layout. Figure out which of your ServSwitch Multi system’s

Transmit-Card ports you want to connect to the Receive Module’s ports. You might want to refer to the
sample layouts in the chapter about the Hub in the manual for the ServSwitch Multi system. If you’re not
sure what the best arrangement of cable connections would be, please call Black Box Technical Support.
(We strongly encourage you to call Black Box Tech Support anyway, to discuss your application, before you
perform any large or complex ServSwitch Multi installation.)

2. If you are installing this Module at the same time you install the Hub: If you haven’t done so already, install the fan

assemblies and power supplies in your Hub. Plug in the power supplies and turn them ON.

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com •   E-mail: info@blackbox.com

Doc. No. 590-156-001 Rev. A

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com •   E-mail: info@blackbox.com

BLACK BOX and the 

logo are registered trademarks, and ServSwitch and ServSwitch Multi are trademarks, of Black Box Corporation. Any other trademarks mentioned

© Copyright 2000. Black Box Corporation. All rights reserved.